BARIX Streaming Client Manual de usuario descargar pdf (Pagina 21)

Trap Repeat

Deﬁne the SNMP trap repeat interval. The trap is repeated if the audio level values are still out of

range.

Silence Timeout

Deﬁne the time interval for sending a trap after the low audio level is detected.

3.4 I/O Settings

Conﬁgure which of the commands below should be issued when the CTS signal on the serial

connector is activated

CTS close command

Conﬁgures which command should be issued when the CTS signal on the serial connector is

activated

CTS open command

Conﬁgures which command should be issued when the CTS signal on the serial connector is

deactivated

Commands

Commands can be joined using the “&” character and will be executed sequentially. For further

commands refer to the “Instreamer technical documentation”.

SENDING MODE

c=84 : Deactivate the sending mode, if not send always

c=91 : Activate the sending mode

SERIAL

c=89 : Simulate the CTS Signal being activated

c=90 : Simulate the CTS Signal being deactivated

c=60 : Activate the RTS Signal

c=61 : Deactivate the RTS Signal

21 Device Conﬁguration

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 34 35

Sin comentarios

BARIX Streaming Client Manual de usuario Pagina 21