BARIX Instreamer Manual de usuario descargar pdf (Pagina 43)

User Manual “Instreamer“ - V4.03 - 24th October 2013

SERIAL GATEWAY

The Serial Gateway function allows the

establishment of a serial connection between two

devices over a LAN or WAN.

To enable the Gateway function "Destination IP" and

"Destination port" are set at the initiator (active)

device. At the receiver (passive) device the “Local

port” is set to the partner's “Destination port”.

On power up the active device connects to the

passive device and tries to reconnect automatically

if the connection is lost. If the connection is

successful serial data can be passed end-to-end

across the network.

Local port

Defines the port on which the serial interface can be

accessed for serial gateway applications. Only when

"Local port" is set to

"0"

can the serial interface be

used as a command interface.

If Destination IP is nonzero and the "Local port" is

set to a value then this will be the source port of the

TCP connection. If the Destination IP is nonzero and

"Local port" is

"0"

a random source port is used.

Default:

"12303".

Destination IP

To have this Barix Instreamer actively establish a

serial gateway select the destination IP address of

the device with which serial data will be exchanged.

Select

"0.0.0.0"

to disable the gateway and use the

serial interface locally only.

Default:

"0.0.0.0"

(disabled).

Destination port

Defines the port for the active serial gateway

function (see destination IP).

Default:

"0"

(disabled)

BARIX AG | 28. Jan. 2014 | Device Configuration | 43 /63

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 62 63

Comentarios a estos manuales

Sin comentarios

BARIX Instreamer Manual de usuario Pagina 43

Comentarios a estos manuales