BARIX Instreamer Manual de usuario descargar pdf (Pagina 38)

User Manual “Instreamer“ - V4.03 - 24th October 2013

Other configurations are also possible since in

general entry #7 of the Streaming table modifies the

first entry in the m3u and asx files and entry #8

modifies the second file entry.

Limitation: Although eight entries can be configured

only six concurrent radio servers are supported.

Connection type - RTP entry

Set the connection type to “RTP” (Real Time

Protocol) for an RTP destination. The IP “0.0.0.0”

will broadcast (UDP) on the subnet (e.g.

"192.168.0.255") on the port selected under “Port#”

(e.g. 4040), enter an IP for a UDP unicast destination

(e.g. “192.168.0.11).

Connection type - BRTP entry

Set the connection type in the first entry to “BRTP”

(Barix Real Time Protocol) for a BRTP server (up to

32 clients). The IP “0.0.0.0” will act as a BRTP

listener (UDP) waiting for BRTP clients requesting a

stream on the port selected under “Port#” (e.g. 80).

Up to 32 external devices may register and up to 32

RTP streams at 128kbit/s are supported. This

maximum rate is approximately provided by the

MP3 setting: Encoding+Frequency MPEG1/48kHz

and Encoding quality 5.

Connection type - SIP entry

SIP is only available with the first entry.

Set the connection type to “SIP” for an asterisk SIP

server destination. Enter the IP of the SIP server. SIP

works only when either “u-Law 8kHz” or “a-Law

8kHz” encoding is selected. Enter the UDP port of

the SIP server under “Port#” (Port 0=5060).

See also section icy-url / SIP user further above.

38 /63 BARIX AG | 28. Jan. 2014 | Device Configuration

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 62 63

Sin comentarios

BARIX Instreamer Manual de usuario Pagina 38