BARIX Instreamer Manual de usuario descargar pdf (Pagina 11)

Technical Documentation “Instreamer “ - V4.03 - 24th October 2013

Element Description CGI command SERIAL, TCP or UDP command

kilobytes per second.

ex. for MPEG2/24khz VBR and encoding quality 6:

hexadecimal 0x602 is decimal 1538. The command then will

be e=1538

e=255 restarts the encoder without changing the settings.

SETSERGATEWAY Sets the destination IP address and port for the serial

gateway and connect to it. Alternatively, close an existing

connection by setting a zero IP address. If this command is

executed via the serial command interface the connection will

be closed 1 sec after the last transmitted or received byte.

g=[<ip>][:<port>]

<ip> is the destination IP address. 0.0.0.0 to close the

connection.

<port> is the destination port. If none, LOCALPORT is used.

g=… 0x67 0x3D … 0x00 (g=… )

SENDIR Transmit an IR command.

This command is word organized (2 bytes, high byte first).

The words can be separated by a comma (no spaces). The

word is interpreted as a hexadecimal value.

The first word is the selection for the IR command data

following. It is organized in bits.

Low Byte: 0x01 = SONY IR modulation

0x02 = RC 5 IR modulation

0x04 = NEC IR modulation

0x80 = RAW IR modulation

Bit 8-14: 0 for base band

1 for 37.5 kHz modulation frequency

2 for 60 kHz modulation frequency

Bit 15: 0 for transmit on serial port 0 (Serial IR

Dongle)

1 for transmit on IR OUT

Example: 8102 for RC 5 IR modulation with 37.5 kHz on IR

OUT.

j=… 0x70 0x3D … 0x00 (j=… )

11 Software Application Interface Software Application Interface 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 38 39

Sin comentarios

BARIX Instreamer Manual de usuario Pagina 11